Brake Buster

1.) Spray apply a generous amount of Brake Buster to the rim and tire surface

2.) Allow to sit for one minute or greater

3.) Scrub with brush if necessary

4.) Rinse with pressure washer or high-pressure hose

Pearl

1.) Rinse vehicle prior to applying soap solution. 

2.) Apply soap solution by hand or through foam gun. 

3.) Wash vehicle with wash pad 

4.) Rinse thoroughly

5.) Dry vehicle using appropriate drying cloth.

Dilution:

Use 1 ounce (two cap fulls) of Pearl Auto Shampoo per gallon of water. Optimum dilution ratio is from 80-128: 1 with water. 

Note:

Always wash vehicle in shaded area when possible and in designated wash area to ensure proper drainage exists to comply with all local, State and Federal environmental regulations.

Bead Maker

1.) Wash vehicle prior to product application. (Bead maker works best on new finish or freshly detailed vehicles.)

2.) If necessary clay the surface of the paint prior to applying Bead Maker. 

3.) Spray apply to paint surface. 

4.) Bead maker may be applied to wet or dry surfaces. (Dry surface application will enhance overall product performance.)

5.) Once applied remove product with a micro fiber towel. 

6.) Flip towel as needed for proper product removal. 

7.) Repeat process over entire painted surfaces of the vehicle. 

8.) Allow product to cure for a minimum of eight hours to achieve maximum performance