GTECHNIQ | G1 CLEAR VISION SMART GLASS

1.) Work in a well-ventilated area, above 5°C, and out of direct sunlight

2.) Wear gloves and make sure all glass is clean and dry

3.) Clean glass with G6 Perfect Glass and a microfiber cloth

4.) Shake G1 bottle well

5.) Apply a generous amount of G1 to an applicator pad and spread in circular motions, then let cure for 5 minutes

6.) Apply a second layer using side-to-side strokes with a fresh pad, wait another 5 minutes

7.) Remove residue using G2 applied to an applicator, work in small sections and immediately buff with a clean microfiber cloth

8.) Clean glass and wiper blades again with G6 and a cloth 

9.) You can apply G1 directly to wiper blades without removing it for added performance

10.) Avoid rain or moisture for at least 3 hours after application

Note:

For best prep, polish with G4 Nano Glass Polish using a machine or hand pad, then wipe down with G6 and a microfiber until no residue remains. For windscreens, apply 3 layers; side and rear windows only need 1 layer. Store in a cool, dry place. Use G1 and G2 within 3 months of opening