GSF

Snow Foam:

1. Pour approx. 20 ml Snow Foam into 1 L water
2. Lather the vehicle using a foam sprayer
3. If necessary, clean with washing mitts or similar and rinse with water.

Handwash:

1. Pour 50 ml into 10 litres water
2. Clean the vehicle with washing mitts and rinse with water
3. Also perfectly suitable for application using a foam gun

PW

Manual use: 

1. Pour approx. 30ml ProtectorWax into 1l water
2. Apply it to the clean, still wet vehicle using a foam sprayer or pump dispenser
3. Let it soak in. 

Rinse the product thoroughly using a pressure washer to avoid stains.

Foam Gun:

1. Adjust the pre-dilution accordingly
2. Pat dry any residual water 
3. Only mix the product for one application and do not store.

Dilution:

Apply undiluted with dosing pump undiluted or in a ratio of up to 1:2. Recommended dosage per car: hot/cold wax: 13-19 ml. Foam wax: 13-19 ml. Premium wax: 16-23 ml. VDA conform to class

GS

Vehicle Exteriors:

1.  Apply over whole surface
2. Allow to react for a short time
3. Use a high-pressure cleaner to rinse off thoroughly.

Dilution: Depending on the dirt accumulation: cleaning vehicle exteriors and engines use a 1:5 to 1:30 solution.

Vehicle Interiors:

1. Remove product residues with a damp cloth or a wet/dry vacuum cleaner.

Dilution: Cleaning vehicle interiors and textiles use a 1:10 to 1:20 solution.

Dilution:

Workshop and industrial floors use a 1:40 to 1:120 solution. 

VDA conform to class A: reaction time max. 5 min, max. application concentration 1:3