Bead Maker

1.) Wash vehicle prior to product application. (Bead maker works best on new finish or freshly detailed vehicles.)

2.) If necessary clay the surface of the paint prior to applying Bead Maker. 

3.) Spray apply to paint surface. 

4.) Bead maker may be applied to wet or dry surfaces. (Dry surface application will enhance overall product performance.)

5.) Once applied remove product with a micro fiber towel. 

6.) Flip towel as needed for proper product removal. 

7.) Repeat process over entire painted surfaces of the vehicle. 

8.) Allow product to cure for a minimum of eight hours to achieve maximum performance

Defender

1.) Apply to a cool dry surface out of direct sunlight

2.) Apply directly

Dream Maker

For Dry Paint Application:

1.) Mist 1-2 sprays per panel

2.) Immediately work the product in with a Microfiber towel. Flip the towel as needed to level the product

For Use as a Drying Aid:

1.) Apply 1-2 sprays per panel

2.) Work the product in with your favorite drying towel

Note:

Dream Maker should be applied to a freshly washed vehicle that is free of contaminates. 

Dream Maker contains no protective additives so towels will continue to be absorbent after frequent use. This product is also suitable on Chrome and Gloss, but should be avoided on matte surfaces. Any overspray can be wiped off with a microfiber towel.